1. Interior Fuse Box: Located on the driver's side footwell, you'll find a fuse labeled "RADIO" or "AUDIO". This fuse is usually rated at 10 amps.
2. Engine Fuse Box: Located in the engine compartment, near the battery, you'll find another fuse labeled "RADIO" or "AUDIO". This fuse is also typically rated at 10 amps.
If you're experiencing issues with your radio display, check both of these fuses to ensure they are intact and not blown. If either fuse is blown, replace it with a new fuse of the same amperage rating.
Here are the additional steps to access and check the fuses:
1. Driver's Side Footwell Fuse Box:
a. Open the driver's side door and locate the fuse box cover in the footwell area.
b. Remove the fuse box cover by gently pulling it upwards.
c. Refer to the fuse diagram provided on the inside of the fuse box cover to locate the "RADIO" or "AUDIO" fuse.
2. Engine Fuse Box:
a. Open the hood of the vehicle and locate the engine fuse box.
b. Remove the engine fuse box cover by pressing the release tabs and lifting it up.
c. Refer to the fuse diagram found on the inside of the engine fuse box cover to locate the "RADIO" or "AUDIO" fuse.
Remember to always consult the vehicle's owner manual for specific fuse locations and amperage ratings, as they may vary depending on your model and trim level.