Arts >> Music >> Musical Instruments

How to Replace a Player Piano Scroll (Piano Roll)

Steps to change a paper roll in a standard player piano:

  1. Open the spool box: Release latch/knob on the fallboard or keybed
  2. Remove old roll: Lift out; note orientation (perforations usually face forward/toward tracker bar)
  3. Prepare new roll: Insert tab/hook into take-up spool slot. Wind a few turns by hand
  4. Thread roll: Guide paper over tracker bar (hole-reading mechanism), under tension rollers, onto take-up spool
  5. Align perforations: Ensure holes align with tracker bar holes; adjust side guides
  6. Set tension: Use tension knob/lever so paper feeds smoothly without slack or tear
  7. Close spool box.
  8. Test: Start motor; verify music plays correctly, no skips/tears

Refer to your model's manual (e.g., Gulbransen, Aeolian, QRS, Ampico) for specifics.

Musical Instruments

Related Categories