* A Phillips head screwdriver
* A flat head screwdriver
* A pair of needle nose pliers
Instructions:
1. Disconnect the negative battery terminal. This will prevent any electrical damage from occurring while you are working on the radio.
2. Remove the two Phillips head screws that hold the radio faceplate in place.
3. Gently pry the faceplate off of the radio using the flat head screwdriver. Be careful not to damage the faceplate.
4. Disconnect the electrical connectors from the back of the radio. There will be two or three connectors, depending on the model of your radio.
5. Remove the four Phillips head screws that hold the radio in place.
6. Gently pull the radio out of the dash. Be careful not to damage the dash.
7. Reconnect the negative battery terminal.
8. Test the radio to make sure that it is working properly.
If you are having difficulty removing the radio, you may want to consult with a professional.