Swapping a P Bass Neck onto a Fender Bronco Bass: Possible But Complex
Yes, it's possible—but not a direct bolt-on. The Bronco Bass (short-scale, 30") and Precision Bass (long-scale, 34") have different neck pockets, heel dimensions, and scale lengths.
Required Modifications
- Neck pocket width: Bronco pocket is narrower (~2.25" vs. P Bass ~2.5"). The P Bass neck heel must be sanded/routed narrower.
- Screw holes: Misaligned. New pilot holes must be drilled in the body (and possibly neck) for the 4-bolt pattern.
- Scale length mismatch: A 34" neck on a 30" body moves the bridge intonation point ~4" back. The bridge must be relocated—requiring filling old holes, routing new ones, and refinishing.
- Intonation limits: Even with bridge relocation, the shorter body may limit saddle travel for proper intonation.
- Pickguard/control plate: Won't align; new ones needed.
Better Alternatives
- Buy a short-scale P/J or P bass neck (e.g., from Warmoth, Allparts, or Fender's own 30" necks) designed for Bronco/Mustang/Micro Bass bodies.
- Consider a Squier Bronco Bass (already 30") and upgrade its electronics/hardware.
This is a significant luthier project. Expect $300–$600+ in labor alone if done professionally.