DIY Hapi Drum: Build Your Own Tongue Drum from Plywood
Materials
- 12–14" diameter, 1/4" plywood (circle)
- 1/8" foam circle (same diameter)
- 18" square cotton fabric
- Duct tape
- 12" wooden dowel (mallet handle)
- 18" leather thong or rope (mallet wrapping)
Tools
- Jigsaw or scroll saw
- Drill with 1/2" bit
- Scissors
- Stapler
- Hot glue gun
Step-by-Step
- Cut the plywood circle and sand edges smooth.
- Drill a 1/2" center hole for the mallet post.
- Cut foam circle, glue centered on plywood (this is the playing surface).
- Cut fabric 2" larger than plywood, fold edges under 1", staple tightly around the rim.
- Wrap dowel with thong/rope to form a mallet head; insert into center hole.
- Secure remaining thong/rope around the dowel base.
Tips for Better Results
- Use quality plywood for strength and lightness.
- Cotton fabric yields a softer, warmer tone than synthetics.
- Don't over-tighten the fabric—some give improves resonance.
- Decorate freely: paint, woodburn, add personal touches.
This simple design mimics the principle of a tongue drum (hapi drum): a resonant membrane over a cavity. Experiment with different foam densities and fabric tensions to tune the sound.