Step 1: Connecting the Power Cable
---
1. Locate the power socket on the amplifier.
2. Connect the power cord to the power socket.
3. Plug the power cord into a power outlet.
Step 2: Connecting Audio Sources
---
1. Identify the audio source you want to connect to the L7 nexis.
2. Connect an audio cable from the audio source to the appropriate input on the amplifier.
- For RCA inputs, use a pair of RCA cables.
- For 3.5mm inputs, use a 3.5mm jack to a RCA cable or 3.5mm jack to 3.5mm jack cable.
- For XLR inputs, use XLR cables.
Step 3: Connecting Speakers
---
1. Identify the speaker cables that came with the L7 nexis amplifier.
2. Connect the speaker cables to the amplifier's speaker terminals.
- For positive (+) terminals, connect the red wire of the speaker cable.
- For negative (-) terminals, connect the black wire of the speaker cable.
3. Connect the other ends of the speaker cables to the speakers.
4. Ensure the speaker cables are properly connected and secure.
Step 4: Powering on the Amplifier
---
1. Turn on the power switch of the amplifier.
2. The amplifier's power LED indicator should light up to indicate that the amplifier is powered on.
Step 5: Adjusting Volume and Other Settings
---
1. Use the volume knob to adjust the volume level of the speaker.
2. Adjust other settings (e.g., bass, treble, etc.) according to your preferences using the amplifier's control panel.
Note: Refer to the user manual of the L7 nexis audio speaker for specific instructions and troubleshooting steps.