How to Connect TR-2920 Model Speakers
Typical setup for powered stereo speakers (like the TR-2920):
- Check terminals – Identify + (red) and – (black) on speakers and receiver/amp.
- Prepare wires – Strip ½" insulation; ensure no stray strands.
- Connect – Receiver + → Speaker + ; Receiver – → Speaker –. Secure tightly.
- Power – Plug the active speaker (with amp) into AC outlet. Connect passive speaker to active via supplied cable.
- Power on – Turn on active speaker's switch.
- Configure receiver – Set speaker size (small/large), crossover, and level calibration.
- Test – Play audio; adjust balance/volume.
Consult your receiver's manual for specific configuration menus.