[Image of the wiring diagram schematic]
Install Instructions Aftermarket Radio (No Sound)
1. Disconnect the negative battery terminal.
2. Remove the factory radio.
3. Connect the aftermarket radio's wiring harness to the vehicle's wiring harness.
4. Connect the aftermarket radio's antenna wire to the vehicle's antenna.
5. Connect the aftermarket radio's power wire to the vehicle's constant power source.
6. Connect the aftermarket radio's ground wire to the vehicle's chassis.
7. Reconnect the negative battery terminal.
8. Turn on the aftermarket radio and test the sound.
If you still do not have sound, you may need to bypass the factory amplifier. To do this, you will need to:
1. Locate the factory amplifier.
2. Disconnect the factory amplifier's input and output wires.
3. Connect the aftermarket radio's speaker wires directly to the factory amplifier's speaker outputs.
Once you have bypassed the factory amplifier, you should have sound from your aftermarket radio.