How Do you Program a Sharp Aquos remote control to Sony tv?

To program a Sharp Aquos remote control to a Sony TV, follow these steps:

1. Hold the "TV" button on your Aquos remote control for about 5 seconds until the LED indicator light starts blinking rapidly.

2. Enter the 3 digit code corresponding to your Sony TV on the Aquos remote control. You can locate the code in your remote control manual.

3. If the LED indicator light turns off, it indicates that the remote control has successfully paired with the TV.

4. Direct the remote towards your Sony TV and press the "Power" button to ensure the remote is working.

Here are the codes you can try for Sony TV:

-010

-011

-016

-021

-039

If none of the codes above work, you can also try performing a manual search to program your Aquos remote control to your Sony TV.

Here's how:

1. Hold down the "TV" button on the Aquos remote until the LED indicator light blinks.

2. Press and quickly release the "Power" button on the Aquos remote.

3. Aim the Aquos remote at your Sony TV and continually press the "Volume Down" button on the Aquos remote until your Sony TV's volume lowers.

4. Once you see a change in volume, stop pressing the buttons. The remote should be programmed.