Screw Size for 37-inch RCA TV Wall Mount: M4 × 12mm Standard
For most 37-inch RCA TVs, the standard VESA mount pattern is 200mm × 200mm (or sometimes 100mm × 100mm). The required screws are typically:
Standard Specs
- Size: M4 × 12mm (metric) or #8 × ½" (imperial).
- Length: 10–16mm (⅜"–⅝") including the bracket thickness. Too long = risk of puncturing internal components.
- Thread: Coarse machine thread (M4 = 0.7mm pitch).
- Head: Flat or pan head, Phillips or Torx.
Critical Steps
- Check the manual for exact VESA pattern and screw spec (often in "Wall Mount" section).
- Measure recess depth: Insert a paperclip into the mount holes to gauge max screw length.
- Use the screws included with your mount—they're matched to the bracket thickness.
- If buying separately: Get an M4 assortment kit (10mm, 12mm, 16mm).
Tools & Hardware Checklist
- Stud finder (mount into studs, not drywall alone)
- Level
- Drill + appropriate bits
- Socket wrench or screwdriver for M4/#8
- Spacers/washers if mount holes are countersunk
Warning: The "#8 × 1¼"" in the source is too long for most modern flat-panels—likely for older, deeper CRT/early LCD mounts. Verify depth before using.