Arts >> Movies & TV >> TV

Fixing Blue Tint on 65-Inch TV Screen

A blue cast usually indicates a color-temperature or signal issue. Troubleshoot in order:

  1. Picture Mode: Switch from "Vivid"/"Cool" to "Cinema," "Movie," "ISF Day," or "Custom."
  2. Color Temperature: Set to "Warm 1" / "Warm 2" / "Low" (reduces blue drive).
  3. White Balance / RGB Gain: In expert menu, lower Blue Gain slightly; raise Red/Green if needed.
  4. HDMI Input: Try another port; ensure "HDMI UHD Color" / "Enhanced Format" is ON for 4K sources.
  5. Source Device: Check cable box/streamer/console output settings (RGB vs. YCbCr, Limited vs. Full Range). Match TV.
  6. Cable Swap: Test a certified Premium High Speed HDMI cable.
  7. Factory Reset: Settings → General → Reset (backs up channels/apps).
  8. Firmware Update: Settings → Support → Software Update.

If tint persists across all inputs and internal apps (Netflix, menu), the panel/T-Con board may have a hardware fault (blue LED drift, COF bond failure). Contact Sony support or a certified repair shop.

TV

Related Categories