Connecting a PS2 to a TV with RCA (Composite) Inputs: Step-by-Step
What You Need
- PS2 console (any model)
- Composite AV cable (red/white/yellow) — included with PS2
- TV with RCA (composite) inputs — typically Yellow (Video), Red/White (Audio L/R)
Steps
- Power off both devices.
- Plug the yellow connector into TV's Video In (Yellow); red/white into Audio In R/L.
- Connect the other end to the PS2's AV MULTI OUT port.
- Turn on TV, select correct input (often labeled "AV," "Video," "Composite," or "Input 1/2/3").
- Power on PS2. The browser screen should appear.
- Optional: In PS2 System Configuration → Component Video Out, set to "RGB" or "Y Pb/Cb Pr/Cr" only if using component cables. For composite, leave default.
Troubleshooting
- No picture? Verify input selection and cable seating.
- Black & white only? Ensure yellow is firmly in Video In, not a component (Y) jack.
- Audio buzz? Separate power cords from AV cables; try a ground-loop isolator.
Note: "Holes" = RCA/composite ports. No screwdriver needed—connectors are push-fit.