How to Remove the Radio from a 1996 Chrysler LHS
Tools: Phillips screwdriver, flathead screwdriver, 7mm/9/32" socket (optional), panel clips tool.
- Disconnect battery negative terminal (wait 2 min for airbag capacitor discharge).
- Remove center bezel/trim: Pry gently from bottom; release clips. Remove screws (2–4) if present.
- Remove radio mounting screws: 4 screws (7mm) through radio brackets into dash.
- Slide radio out carefully; disconnect wiring harness (press tabs) and antenna cable.
- Remove mounting brackets from radio sides if transferring to new unit.
Tips
- Take photos of wiring before disconnecting.
- Use panel tool to avoid cracking trim.
- If stuck, check for hidden screws under ashtray/vents.
- Reassembly is reverse order.