Arts >> Movies & TV >> TV

Unlocking the Radio on a 1997 Buick Park Avenue: Step-by-Step Guide

When the battery dies or is disconnected on a 1997 Buick, the TheftLock radio displays "LOC" or "CODE," rendering it inoperable until the correct code is entered. Here are the two methods to get it working again.

Method 1: Using the Original Unlock Code

  1. Turn the ignition to ON (not start). The radio displays "LOC."
  2. Press and hold preset buttons 2 & 3 simultaneously for about 10 seconds until "CODE" appears.
  3. Enter the 4- or 6-digit code using the hour/minute buttons (or tuner/seek buttons, depending on the unit).
  4. Press AM/FM to confirm. The radio should unlock immediately.

Method 2: Retrieving the Code via a Dealer

  1. Get the radio's serial number: Press and hold preset buttons 2 & 3, or remove the radio to read the label on the chassis.
  2. Contact a Buick/GMC dealer with your VIN and the radio serial number. They can look up the code (may charge a fee).
  3. Enter the code using the steps above.

Pro Tip

The code is often printed on a card in the owner's manual packet. Check there first—it saves a trip to the dealer. If the card is lost, the dealer lookup is your only official path (third-party code generators exist but are unreliable).

TV

Related Categories