How to Load Paper in an FD100 Printer: Step-by-Step
Loading paper in the FD100 (a common receipt/label printer) is straightforward. Follow these steps to avoid jams and misfeeds.
Step 1: Prepare the Printer
- Power Off: Turn off the printer and unplug the power cord (safety first).
- Open Tray: Press the release lever on the left side to open the paper tray/cover.
Step 2: Load the Paper
- Place Stack: Insert a stack of paper (thermal roll or fan-fold) into the tray, aligning edges with the guides.
- Adjust Guides: Slide the side guides snugly against the paper stack—no gaps, no bending. Paper must sit flat.
- Orientation: Ensure the print side (thermal coating) faces the correct direction (usually facing down/up per diagram inside tray).
Step 3: Close and Power On
- Close Tray: Gently close the tray/cover until it clicks shut securely.
- Power Up: Plug in the power cord and turn on the printer.
- Test Feed: Press the Feed button to advance paper and confirm smooth movement.
Pro Tip: Before printing, verify the correct paper size/type is selected in your print driver/software settings. Mismatched settings cause cutoff or misalignment.
Note: Exact lever positions and tray design may vary slightly by FD100 sub-model (e.g., FD100U, FD100T). Consult the manual for your specific unit.