Step-by-Step Instructions:
1. Remove all parts and hardware from the packaging.
2. Assemble the Frame:
a) Attach front and back support tubes to side tubes using provided screws.
b) Insert tube caps where noted in the instruction manual.
c) Attach the mattress support and bassinet brackets.
3. Assemble the Bassinet:
a) Unhook canopy bars from their storage position and attach to the support bracket by sliding the canopy tubes through the support brackets
b) Attach the canopy fabric by slipping through and around support brackets.
c) Make sure the fabric sits evenly and flush against the inside of the canopy tubes.
4. Attach the Bassinet to the Frame:
a) Locate the two hooks on the bassinet body.
b) Slide the hooks into the bracket attached to the frame.
c) Press the bassinet body down until it locks in place.
5. Secure the Mattress Pad and Sheet:
a) Place the mattress pad inside the bassinet body.
b) Fit a sheet over the mattress pad.
Bassinet Changer Assembly:
1. Insert changer posts into brackets on the side rails of the bassinet as shown in the manual.
2. Ensure that the changer is secure by pressing down and pulling up.
Bassinet Rocker Assembly:
1. Turn the bassinet frame with the changer post facing you (the base of the frame should be facing upward)
2. Attach rocker feet into the foot brackets attached to the bassinet frame.
3. Gently rock the bassinet to ensure the rocker feet are secure.