1991 Jeep Cherokee Door Buzzer Fuse: CHIME Fuse Location and Diagnosis
Fuse: CHIME (10A or 15A, typically 10A)
Location
- Fuse Block: Under hood, driver's side fender well
- Cover Label: "CHIME" or "BUZZER" (varies by build month)
- Position: Typically cavity 12, 14, or 16 (check diagram on cover)
Diagnosis Steps
- Open hood → locate black fuse box (near battery)
- Remove cover → find "CHIME" on diagram
- Pull fuse with puller/needle-nose
- Inspect: broken filament = blown
- Test: Multimeter continuity or swap with same-amp fuse
Related Circuits on CHIME Fuse
- Key-in-ignition buzzer
- Headlights-on reminder
- Seatbelt warning
- Door ajar warning
If Fuse Blows Repeatedly
- Check door jamb switches (corrosion, stuck)
- Check key cylinder switch (steering column)
- Check wiring harness at door hinge (chafing)
- BCM (Body Control Module) fault possible
Note: Removing fuse disables ALL chimes — including safety warnings.