Fixing a Blown Fuse in a Floor Lamp: Step-by-Step Guide
How to Replace a Floor Lamp Fuse
Many floor lamps have an in-line fuse in the plug or base. Here's the safe replacement procedure.
Tools & Parts
- Replacement fuse (exact same type: amp rating, voltage, size—usually 3A, 5A, or 13A glass/ceramic cartridge).
- Small flathead screwdriver (if fuse holder has screw cap).
- Flashlight.
Steps
- Unplug the lamp. Verify outlet is dead (test with another device).
- Locate fuse holder. Usually in the plug (UK BS1363) or base compartment (US). Twist or unscrew cap.
- Inspect old fuse. Blown fuse shows broken filament, blackened glass, or melted element.
- Remove fuse. Gently pull or unscrew. Note orientation (some are directional).
- Insert new fuse. Match rating exactly. Never bypass with foil/wire—fire hazard.
- Reassemble. Secure cap. Plug in.
- Test. Turn on. If fuse blows again → wiring fault, short circuit, or wrong wattage bulb. Stop. Consult electrician.
Common Fuse Types
- US Plug Fuse: Rare in modern lamps (mostly in vintage).
- UK Plug Fuse (BS1362): 3A (red), 5A (black), 13A (brown) – in plug top.
- In-Line Fuse Holder: Cylindrical, in cord near plug or base. 250V, 1-5A typical.
Prevention
- Use correct bulb wattage (check label).
- Avoid daisy-chaining extension cords.
- Inspect cord for fraying, pinching.
If unsure, replace the entire plug/cord assembly ($5-10) or hire a pro.