How to Measure the Height of a Ramp: Vertical Rise vs. Slope Length
Direct Measurement (Vertical Rise)
- Establish reference: Ground level at ramp base (or finished floor if indoor)
- Use a level & tape: Place level on ramp surface at top edge; measure vertically down to reference point
- Alternative: Laser level / digital inclinometer for precision
If Ramp Is Already Built (No Access to Top)
- Measure slope length (run) + angle: Height = run × sin(angle)
- Measure rise per code: ADA max 1:12 (1" rise per 12" run). If run = 144", max rise = 12"
Key Tips
- Ensure tape/level is plumb (90° to ground)
- For curved/uneven ramps, measure at multiple points and average
- Record in inches/cm for construction; degrees/% for engineering
Height = vertical rise, not slope length.