How to Apply Shoe Goo: 6 Steps for Sole Repair
- Clean: Remove dirt/oil; dry completely.
- Prep: Puncture tube seal; wear gloves (optional).
- Apply: Squeeze thin layer onto damaged area (sole separation, hole, worn heel). Use toothpick/spreader for even coverage.
- Clamp/Press: Hold surfaces together with rubber bands, tape, or clamp.
- Cure: 24 hours for full strength; 72 hours in cold/humid conditions.
- Finish: Trim excess with razor; sand smooth if needed.
Tips: Roughen smooth surfaces with sandpaper first. Not for structural repairs on safety‑critical footwear.