Choose a flat working surface in a well-ventilated area or work in a covered area outdoors. Very fine dust will fly around as you cut and carve the pipe.
Don protective gear before you beginning. Soapstone is a form of talc and can cause breathing problems in some people when inhaled. Any mask that prevents you from breathing in particles is suitable. Wear safety glasses or goggles to protect your eyes from any flying rock debris.
Inspect the soapstone from all angles and try to keep the image of the pipe in mind while you work. Draw the basic design of the pipe onto the soapstone using a soft pencil and make simple lines to outline the bowl and stem. Don’t worry about making a detailed sketch; focus on achieving the desired size.
Begin cutting the pipe shape using carving tools. Select a U-shaped or V-shaped scoop. Shape the pipe bowl and hollow it out.
Cut away excess material to create the handle. Use a thin tool to hollow out the handle and the mouthpiece.
Carve any designs into the sides of the bowl and handle.
Polish the finished product using fine-grained sandpaper. Polish all edges and etched areas.
Wet the soapstone to clean off dust and check the finish. Dry and continue polishing until you achieve the desired effect.
Use a lint-free cloth and rub mineral oil into the finished soapstone pipe to bring out its luster.