Serpentine Belt Tensioner Bolts on a 1999 Chevrolet Monte Carlo (3.1L/3.8L V6)
Bolt Locations
- Power Steering Pump Bracket Bolt: Front of engine, upper area.
- Alternator Bracket Bolt: Front of engine, below PS pump.
- Tensioner Pulley Bolt: Side of engine, behind alternator bracket (the primary adjustment bolt).
Some models have an additional bolt near the crankshaft pulley.
Loosening Procedure
- Locate all three bolts.
- Loosen (don't remove) PS pump & alternator bracket bolts.
- Turn the tensioner pulley bolt (usually clockwise) with a ratchet/breaker bar to relieve belt tension.
- Slip belt off pulleys.
- Retension by reversing: tighten tensioner bolt to spec, then bracket bolts.
Critical Safety & Tips
- Disconnect battery negative first.
- Consult a vehicle-specific repair manual (Haynes, Chilton, Alldata) for torque specs and belt routing diagram.
- If the tensioner is automatic (spring-loaded), use a 3/8" or 1/2" drive ratchet in the tensioner arm—no bolt turning needed.