Remove all parts of the Penetray Motorized Color Wheel and place them on a flat surface such as a table or the floor.
Arrange the four colored quarters in a circle, any way you like, as long as they are face down and form a circle.
Bond the quarters together using the four steel clips. Place each steel clip between two of the quarters and gently push it down to lock it in place. Make sure the clip is placed evenly between the edge and center of the wheel. The wheel will not shine properly if the clip touches the edge or the center. Check to see if all quarters are locked properly.
Open the fixture which the wheel stands on and put in any standard light bulb. Note that the fixture varies from model to model, but usually you just have to remove the top of it by twisting it like a cap and screw the light bulb in as you would in a lamp. Place the top back on.
Attach the wheel to the fixture using the wing-nut screw. Do this by placing the fixture through the center of the wheel, and then twisting the wing-nut screw at the front of the wheel to hold it in place.
Attach the wheel on its fixture onto the stand using the included screw unless your model features an adjustable stand which you simply bend forward or backward to adjust. Choose the desired angle you want the Color Wheel to shine from and screw it on. Hang it or let it stand on any flat surface.
Plug the wheel into an outlet. This will automatically turn the wheel on. It will shine and rotate without having to turn on a switch. To turn it off, simply unplug.