Clean the aluminum heads of all dust and dirt using a solution of 1/2 cup TSP (Tri-Sodium Phosphate) to one gallon of warm water. Use a wet rag to apply the solution.
Rinse the aluminum heads in warm water until the water runs clear.
Dry with a towel.
Place a Mothers PowerBall Drill Mounted Polisher on your hand-held drill and drizzle the PowerBall with your Mothers PowerMetal Aluminum.
Turn on the drill and work the Mothers PowerMetal Aluminum over the surface of the aluminum heads. Make sure the heads are covered and allow the cleaner to sit on the surface of the aluminum heads for 10 to 15 minutes.
Buff the head with a cotton cloth to remove the Mothers PowerMetal Aluminum.